FAÇADE CLEANING.
MGP SMOG Cleaner for removing smog and atmospheric dirt from stone façades, monuments and statues. Recommended for dissolving and removing carbon dioxide and smog deposits from stone, marble and granite surfaces, rough or polished surfaces.Yield: 1 litre for about 2 - 3 sqm.
Instructions: dilute 1 litre MGP SMOG in 1 litre water. Directly apply the suitably diluted product onto the surface. Wait about 10 minutes, then clean using a floor brush and rinse with a water-jet machine. In case of persistant spots, repeat the treatment.
MGT 6 Stain-proofing, oil-repellent treatment for sandstone in general, marble, granite, natural stone, rough, sandblasted, bush-hammered, flamed, honed finished agglomerates. Full-adsorption impregnator; it gives stone its natural beauty and does not leave translucent residues on the surface.Yield: 1 litrefor about 6 - 10 sqm.
Instructions: dusing a cloth evenly apply MGT 6 on the surface with circular mevements or spray MGT 6 with a low-pressure gun. Do not apply MGT 6 on wet surfaces.
SEBA Stain-proofing, oil-repellent treatment for sandstone in general, marble, granite, natural stone, rough, sandblasted, bush-hammered, flamed, honed finished, agglomerates. Full-absorption impregnator; it brightens the stone colour up and does leave translucent residues on the surface. Yield: 1 litre for about 6 - 10 sqm.
Instructions: Smooth and polished surfaces: using a cloth evenly apply SEBA on the surface with circular movements. Rough or split-bush-hammered surfaces: evenly spray SEBA with a low.pressure gun. Allow to dry for 4-6 hours before applying a second coat. Use the product on clean and dry surfaces only.
MGT 7 - Water-proofing treatment for surfaces of natural stone, marble, granite, brickwork, agglomerate, decoration bricks, tufaceous rocks, decoration concrete and any kind of absorbing floor or exterior lining.Yield: 1 litre for about 5 - 6 sqm.
Instructions: spray MGT 7 on the surface to treat. Do not apply the product on wet surfaces.