TREATMENTS FOR ANCIENT-FINISHED MARBLE.
MGT 23 Wet effect treatment for brightening up the natural colour of ancient-finished marble and tumble cobblestones that due to processing have a whitened aspect. Suitable for brightening up all natural stones. Protect against dirt and offers a good water-repellence..Yield: 1 litre for about 8 - 10 sqm.
Instructions: using a cloth evenly apply MGT 23 on clean and dry surfaces with circular motions. Do not apply it on wet surfaces.
SPEEDY Rapid Wet effect treatment for Greek key designs, rosettes and mosaic of ancient-looking marble. The product dries rapidly and allows speeding up packaging operations, up the natural colour of ancient-finished marble and tumble cobblestones that due to processing have a whitened aspect. Suitable for brightening up all natural stones. Protects against dirt and offers a good water-repellence.Yield: 1 litre for about 15 - 20 sqm.
Instructions: using a cloth evenly pour a few drops of SPEEDY on clean and dry surfaces with circular motions. Apply 1 coat.
PATINATO Protective liquid wax for ancient-looking marbles. Specific for glazed or brushed marble.Yield: 1 litre for about 15 - 20 sqm.
Instructions: using a cloth evenly pour a few drops of PATINATO on clean and dry surfaces with circular motions. Apply 1 coat. It is possible to apply PATINATO with floor-polisher or floor-washer.
MGP 30 Cleaner for removing sealing residues from porcelain grès and natural stones, and concrete residues from slate; especially recommended for cleaning cobblestones, rosettes and ancient-finished marbles.Yield: 1 litre for about 4 - 6 sqm.
Instructions: slight dirt: use 1 litre MGP 30 every 5 litres of water. Persistent dirt: use 1 litre MGP 30 every litre of water. Pour the solution directly onto the surface, wait 5-10 minutes before polishing with a floor brush in case of manual cleaning or a cleaning machine. Remove any residue with a wet-vacuum. Rinse with water. For split or rough surfaces, pour the solution and polish using a cleaning machine and a tynex brush to perfectly clean the split interstices. On split-slates, pour the solution and polish with a scratch-brush to eliminate whithish spots caused by acid corrosion. Do not use it on polished marble.
MGT SAND Wet effect treatment for brightening up sandblasted marble like red Verona, rosa Perlino, Trani, etc. Protects against dirt and offers a good water-repellenceYield: 1 litre per 4 - 5 sqm.
Instructions: using a cloth, evenly apply MGT SAND onto clean and dry surfaces with circular motions. Allow to dry for at least 1 hour, then apply a second coat when required. On raw or bush-hammered surfaces, apply MGT SAND by spray-gun.
MGT 5 Finished treatment with glazing effect for rough, sandblasted, bush-hammered, naturally split, honed surfaces, sandstone and limestone. Covers the stone pores and makes the cleaning easier without forming anti-aesthetic plastic films. Suitable for clear sandstone like "pietra dorata", Vicenza stone, French stones or sandblasted marbles like Carrare, Botticino, etc. Protects the surfaces against stains and dirt.Yield: 1 litre for about 8 - 10 sqm.
Instructions: apply MGT 5 with a cloth or spray it with a low-pressure gun.