TREATMENTS FOR MARBLE, GRANITE, NATURAL STONE, SANDSTONE, ROUGH.
MGT 28 Full absorption, solvent-free, stain-proofing impregnator for sandstone in general, marble, granite, natural stone, sandblasted, bush-hammered, flammed or honed finished and concrete agglomerates. Protects the surfaces against dirt and grease.Yield: 1 litre for about 6 - 8 sqm.
Instructions: apply MGT 28 by brush, cloth or low-pressure spray-gun also on wet surfaces. MGT 28 deeply penetrates into the stone and protects it against staining substances. MGT 28 is not a finishing product; therefore the use of a stain-proofing finishing product with glazed effect like MGT 5 is recommended.
MGT 5 Finishing treatment with glazing effect for rough, sandblasted, bush-hammered, naturally split, honed surfaces, sandstone and limestone. Covers the stone pores and makes the cleaning easier without forming anti-aesthetic plastic films. Suitable for clear sandstone like "pietra dorata", Vicenza stone, French stones or sandblasted marbles like Carrara, Botticino, etc. protects the surfaces against stains and dirt.Yield: 1 litre for about 8 - 10 sqm.
Instructions: polished surfaces: apply MGT 5 with a cloth. Rough or bush-hammered surfaces: spray 1 or 2 coats of MGT 5 with a low-pressure gun. Since MGT 5 is a finishing product, it is advisable to use it after applying a coat of a full-absorption water- or solvent-based impregnator.
MGT 6 Stain proofing, oil-repellent treatment for sandstone in general, marble, granite, natural stone, rough, sandblasted, bush-hammered, flamed, honed finished agglomerates. Full-adsorption impregnator; it gives stone its natural beauty and does not leave translucent residues on the surface.Yield: 1 litre for about 6 - 10 sqm.
Instructions: using a cloth evenly apply MGT 6 on the surface with circular movements or spray MGT 6 with a low-pressure gun. Do not apply MGT 6 on wet surfaces.
MGP 30 Cleaner for removing sealing residues from porcelain grès and natural stones, and concrete residues from slate; especially recommended for cleaning cobblestones, rosettes and ancient-finished marbles.Yield: 1 litre for about 4 - 6 sqm.
Instructions: slight dirt: use 1 litre MGP 30 every 5 litres of water. Persistent dirt: use 1 litre MGP 30 every litre of water. Pour the solution directly onto the surface, wait 5-10 minutes before polishing with a floor brush in case of manual cleaning or a cleaning machine. Remove any residue with a wet-vacuum. Rinse with water. For split or rough surfaces, pour the solution and polish using a cleaning machine and a tynex brush to perfectly clean the split interstices. On split-slates, pour the solution and polish with a scratch-brush to eliminate whithish spots caused by acid corrosion. Do not use it on polished marble.
MGR STONE Stone maintaining wax. Maintenance product for surfaces previously treated with glazed finishing products like MGT 5. The product restores the treatment especially in those areas that, due to high traffic, are subject to superficial wear.Yield: 1 litre for about 20 - 25 sqm.
Instructions: pour a small amount of MGR STONE directly onto the surface and evenly apply with a cloth. Allow to dry for about 1 hour before walking on it.